Automatic Technology Australia Elite Instrucciones de operaciones descargar pdf (Pagina 6)

AFFIXING ARMS AND BRACKETS TO GATE

STEP 3

1. Position gate in close position.

2. Assemble Drive Arm Extension to Drive Arm

(fixed to the drive unit) (Fig. 1), using two Hex.

Head screws and spring and flat washers supplied.

3. Assemble Slave Arm to Drive Arm Extension

(Fig. 1). Using plastic washers and shoulder screw

supplied.

4. Assemble Gate Mounting Bracket and Slave Arm

using shoulder screw and plastic washers (Fig 1),

don’t tighten yet.

MOUNTING OF DRIVE UNIT

STEP 2

1. Mount Drive Unit using four (4) 10mm loxins or

dynabolts.

2. Make sure that the Drive Unit is mounted at an

appropriate distance from the ground (Minimum

35mm to allow clearance for drive arm extension).

(Fig 1)

NOTE: If the gateway slopes away from pier/post

make sure an allowance is made for clearance of the

Drive Arm Extension and Slave Arm to not touch

the ground.

CHANGING TO/FROM MANUAL OPERATION

DISENGAGE DRIVE MOTOR, by pulling manual

engage/disengage pin up using the release ring fit-

ted, and while holding, rotate motor assembly in a

clockwise direction.

(Fig. 3 & 4)

( Later RE-ENGAGE DRIVE MOTOR rotate mo-

tor assembly in a anti-clockwise direction.)

Page. 6

ENGAGED

POSITION

DISENGAGED

ROTATE MOTOR

CLOCKWISE TO

DISENGAGE

FIG. 4

DISENGAGE

PULL RING TO

MOTOR

5.Extend arms out straight and mark position where

the Gate Mounting Bracket touches gate (Fig 5).

6. From this mark, measure 10mm toward Drive

Unit and mark again. This is where Gate Mounting

Bracket will be mounted (Fig. 5).

7.Remove the Gate Mounting Bracket from the

Slave Arm and secure the Gate Mounting Bracket

to the gate at second mark.

8.Reassemble Slave Arm to Gate Mounting Bracket

using shoulder screw and plastic washers. Secure

well.

FIG. 3

INSTALLATION OF MECHANICAL DRIVE UNIT

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Comentarios a estos manuales

Sin comentarios

Automatic Technology Australia Elite Instrucciones de operaciones Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para Controles remotos Automatic Technology Australia Elite